industrial lithium traction batteries & energy systems engineered in the UAE
vs 500–800 cycles lead-acid
vs 8–12 hrs + cool-down
no acid spills, no battery room
high ambient thermal design
About Datil Energy Systems
Datil is a UAE-registered battery engineering firm based in Dubai and Ras Al Khaimah. We specialize in converting industrial electric vehicle fleets from obsolete lead-acid batteries to high-efficiency lithium iron phosphate (LiFePO4) systems.
- Engineers on site across the UAE: We measure tray dimensions, verify electrical connections (Anderson / REMA), and calculate exact counterweight ballast requirements before any quotation.
- The datasheet is the decoration: We publish real, measured test metrics. Transparent pricing, honest cycle ratings, and zero marketing exaggeration.
- 5-Year local UAE warranty: All motive systems are assembled, bench-tested, and warrantied in Dubai with fast replacement support.
Traction Battery Systems
Drop-in LiFePO4 packs sized to standard DIN and BCI trays. On-site tray measurement, ballast matching, and local Dubai warranty support.
The battery is 20,000. The machine you don't buy is 150,000. The operator you don't hire is 84,000 a year. The battery is the smallest number on the page — and it's the only one anybody argues about.
— consulting note to client operations · dsv logistics site auditwhy a free lead-acid battery costs you AED 130,000 more than lithium
under standard 2-shift operations (16h/day), the 8-8-8 rule forces you to buy a second machine or build a crane swap station. datil lithium runs both shifts on a single truck.
fleet roi & operational redesign calculator
calculate how opportunity charging converts 8-hour shifts into 12-hour shifts, reduces machine count, and pays for lithium before month one ends.
lead-acid vs lithium — the honest comparison
| lead-acid | lithium (datil LiFePO4) | |
|---|---|---|
| cycle life | 500–800 cycles | 3,000–5,000 cycles |
| charge time | 8–12 hrs + 4 hr cool-down | 1–3 hrs, opportunity charge OK |
| maintenance | water top-ups every 2 weeks, equalization charges, acid spill cleanup | none |
| weight | baseline (integrated as ballast) | 30–50% lighter (custom steel ballast added) |
| floor damage | acid spills corrode concrete and steel racks | sealed, zero spills, zero fumes |
| gulf heat (45°C+) | accelerated degradation, boils electrolyte | rated to 55°C operating ambient |
| upfront cost | lower (AED 2,500–5,000) | 1.5–2.5× higher (AED 5,500–12,000) |
| 10-year TCO | higher (3–4 replacements + downtime + labor) | significantly lower (1 battery, zero maintenance) |
lead-acid to lithium conversion in the UAE — engineering specifications & fitment guide
complete technical retrofit guide for warehouse managers, logistics operators, and fleet maintenance engineers converting material handling equipment across Dubai, Abu Dhabi, and the Northern Emirates.
frequently asked questions — lead-acid to lithium in the UAE
cell engineering database & dubai inventory
every cell on this bench has verified test metrics. our dubai warehouse stocks high-discharge 18650, 21700, and LiFePO4 cells for immediate dispatch across the GCC.
featured in-stock dubai cells · transparent volume pricing
18650
| capacity | 3.0 Ah · 11.04 Wh |
| voltage | 3.68 V (2.5–4.25 V) |
| max cont. discharge | 70 A (~257 W continuous) |
| pulse (5 s) | 140 A (~515 W) |
| AC IR | ≤ 3.0 mΩ |
| weight | ~50 g |
| quantity | unit price | commercial terms |
|---|---|---|
| 1 – 9 pcs | AED 25.00 | Sample / Testing |
| 10 – 99 pcs | AED 20.00 | Pack Builder Tier |
| 100+ pcs | AED 16.50 | Wholesale Box Tier |
21700
| capacity | 4.95 Ah · 17.82 Wh |
| voltage | 3.60 V (2.5–4.20 V) |
| max cont. discharge | 70 A (~252 W continuous) |
| pulse (5 s) | 250 A (~900 W) |
| AC IR | ≤ 4.0 mΩ |
| weight | ~67 g |
| quantity | unit price | commercial terms |
|---|---|---|
| 1 – 9 pcs | AED 45.00 | Sample / Testing |
| 10 – 99 pcs | AED 38.00 | Pack Builder Tier |
| 100+ pcs | AED 32.00 | Wholesale Box Tier |
21700
| capacity | 6.0 Ah · 21.6 Wh |
| voltage | 3.60 V (2.5–4.20 V) |
| max cont. discharge | 50 A (~180 W continuous) |
| pulse (5 s) | 180 A (~648 W) |
| AC IR | ≤ 5.0 mΩ |
| weight | ~70 g |
| quantity | unit price | commercial terms |
|---|---|---|
| 1 – 9 pcs | AED 40.00 | Sample / Testing |
| 10 – 99 pcs | AED 34.00 | Pack Builder Tier |
| 100+ pcs | AED 29.00 | Wholesale Box Tier |
daly smart bms & active balancers
datil is the official distributor of Daly BMS in the UAE. we stock smart bms modules, active balancers, and accessories locally in dubai for immediate delivery. select options to update configuration and pricing.
Smart BMS
| voltage | 12 V |
| series string | 4S |
| max cont. discharge | 100 A |
| communication | UART / RS485 / BT / CAN |
Smart BMS
| voltage | 36 V |
| series string | 10S |
| max cont. discharge | 50 A |
| communication | UART / RS485 / BT / CAN |
M-Series
| voltage | 24 V |
| series string | 8S |
| max cont. discharge | 150 A |
| interface | Standard Port Layout |
ESS BMS
| voltage | 24 V |
| series string | 8S |
| max cont. discharge | 100 A |
| protocols | Pylontech / Growatt / Victron |
Classic BMS
| voltage | 12 V |
| series string | 4S |
| max cont. discharge | 40 A |
| telemetry | None (Hardware Only) |
Balancer
| series string | 4S-8S |
| balancing current | 1 A |
| balance accuracy | ≤ 5 mV |
| compatible chemistries | Li-ion / LiFePO4 |
Smart Bal
| series string | 8S-16S |
| balancing current | 10 A |
| balance accuracy | ≤ 2 mV |
| telemetry | Bluetooth App / UART |
Accessory
| compatibility | All Daly Smart BMS |
| power input | Bus Powered (BMS) |
| enclosure | Durable Molded Plastic |
Licensed Industrial Energy Auditing & Power Quality
High ambient Gulf temperatures (45°C+) place severe thermal stress on industrial refrigeration, chiller loops, compressed air plants, and motive fleet charging infrastructure. Datil delivers certified engineering audits across Dubai, Abu Dhabi, and Northern Emirates—quantifying electrical losses, eliminating power factor penalty surcharges, and sizing turnkey Battery Energy Storage Systems (BESS) for peak demand tariff shaving.
Industrial Sector Auditing Profiles
Engineered scopes for major UAE high-consumption facilities| Facility Profile | Injection molding, metal extrusion, stamping, induction heating |
| Primary Loads | High-power inductive motors, VFD drives, hydraulic power packs |
| Utility Penalty | Low power factor (< 0.90 lag) penalty surcharges on monthly bills |
| Power Quality | VFD-generated THD(V) / THD(I) harmonics, transformer overheating |
| Engineering Action | Detuned APFC capacitor banks, active harmonic filters, drive retuning |
| Facility Profile | Continuous refrigerated storage (-25°C / +4°C), distribution centers |
| Primary Loads | Ammonia / Freon screw compressors, condenser fans, fleet chargers |
| Peak Demand Spike | Forklift fleet shift-change charging overlapping peak summer tariff hours |
| Thermal Risk | Elevated condensing head pressure during 48°C ambient Gulf afternoons |
| Engineering Action | Staggered opportunity charge scheduling, floating head pressure, BESS storage |
| Facility Profile | Commercial office towers, retail shopping malls, hotel resorts |
| Primary Loads | District cooling substations, central chiller plants, secondary pumps |
| HVAC Inefficiency | Low delta-T syndrome across AHUs, excessive secondary chilled water pumping |
| Envelope Losses | Solar thermal irradiance through glazing, infiltration at loading bays |
| Engineering Action | Variable primary flow retrofits, delta-T pressure balancing, building sub-metering |
| Facility Profile | Remote desert yards, quarries, agricultural estates, construction camps |
| Primary Loads | Submersible deep-well pumps, aggregate crushers, site accommodation |
| Generation Baseline | Continuous diesel generators (DG) operating at < 30% low-load (wet stacking) |
| Operating Cost | High localized diesel generation expense (1.20 to 1.85 AED per kWh) |
| Engineering Action | Solar PV + Containerized LiFePO4 BESS hybrid retrofits (60%–85% diesel offset) |
4-Phase Audit Methodology (ASHRAE Level I & II)
Rigorous data acquisition with calibrated precision instrumentationPeak Demand Tariff Shaving with Containerized LiFePO4 BESS
Industrial utility tariffs in the UAE enforce punitive maximum demand charges during afternoon peak hours (12:00 PM – 6:00 PM). By installing modular LiFePO4 Battery Energy Storage Systems (100 kWh to 2 MWh), facilities charge storage during off-peak night hours or from rooftop solar arrays, then discharge during high-tariff windows—cutting maximum demand charges by 25% to 40% without reducing industrial throughput.
Schedule a Certified Facility Energy Audit
Submit your facility details below. Our licensed engineering team will contact you within 24 hours to review Single-Line Diagrams (SLD) and arrange an on-site walkthrough.
engineering tools & battery calculators
Interactive engineering utilities designed for battery pack builders, fleet managers, and industrial electrical engineers. Compare parametric cell data, model 10-year motive fleet conversions, render 3D pack geometries, or size shift runtimes.
Multi-Cell CAD Screenwars Tool
Side-by-side parametric comparison of up to 4 cylindrical or prismatic cells. Features 2D vector CAD millimeter overlays, 1000W domestic appliance power reality check, C-rate continuous discharge limits, and automated delta chips.
- Precision millimeter scale CAD vector overlays
- Continuous vs. Pulse discharge current analysis
- Wh/kg specific energy and Wh/L volumetric density
- Instant one-click engineering PDF dossier export
Custom Battery Pack Builder
Design multi-cell battery packs from 1S to 100S with live series/parallel electrical calculations. Automatically calculates voltage ranges, continuous amperage, busbar copper cross-section sizing, and renders 2D/3D WebGL layout.
- Series (S) and Parallel (P) electrical matrices
- Automated pure copper busbar thickness selector
- Rectangular & honeycomb staggered layout physics
- Physical enclosure box dimension constraint checks
10-Year Motive Fleet TCO Calculator
Calculate exact financial savings when replacing lead-acid forklift or utility fleets with Datil LiFePO4 systems. Accounts for UAE electricity rates, watering labor elimination, acid spill downtime, and battery replacement cycles.
- 24V, 36V, 48V, and 80V Dahbashi OEM price benchmarks
- 1, 2, or 3 shifts daily industrial duty cycles
- Payback horizon in months and 10-year Net Cumulative Savings
- CO2 emissions offset and electricity efficiency gains
Parametric 413-Cell Database
Full-screen interactive data table with instant multi-column sorting across 413 verified cells. Filter by continuous CDR (up to 90A), internal AC impedance (mΩ), chemistry, form factor, or in-stock Dubai inventory.
- Clickable sorting headers (Continuous CDR, IR, Capacity)
- Direct access to 295 official manufacturer PDF datasheets
- Deep engineering dossiers with C-rate runtime tables
- Integrated B2B commercial RFQ cart drawer
3D Parametric Battery Pack Configurator & CAD Studio
Interactive Split-Screen Workbench
Experience zero-scroll parametric design. Edit series/parallel strings, copper busbar cross-sections, BMS protocols, and standard enclosure fit with real-time HUD telemetry and dual 2D/3D WebGL viewport.
industrial applications & capabilities
A professional and reliable supplier providing high-performance lithium batteries, energy storage systems, forklift lithium battery packs, chargers, inverters, and BMS. We serve clients globally and specialize in high-current spot welding (Copper/Nickel Composite), Smart BMS Integration (CAN Bus, RS485 telemetry), and UN38.3 & IEC 62133 Compliance Testing.
about datil energy systems — honest battery systems, made in the UAE
The Datil Story: The Date Seller in the Old Souk
Datil was founded in the UAE on a single, uncompromising principle: the datasheet is the decoration. Like the date seller in the old souk, every tray is on display and every tray is labeled. You point at what you want, and the merchant is right there to give you an honest price. Nothing hidden, no marketing show, no inflated cycle claims.
Facility managers, maintenance supervisors, and logistics operators face extreme conditions in the Arabian Gulf. Ambient temperatures routinely surpass 45°C in warehouse districts from JAFZA and Dubai South to Mussafah and KEZAD. Lead-acid batteries die in these conditions within 12 to 18 months, requiring constant watering and acid room maintenance. Datil designs, builds, and services drop-in LiFePO4 traction systems that handle 55°C operating temperatures and deliver 3,500+ cycles with zero maintenance.
Our UAE Engineering Standards
- On-Site Tray & Ballast Matching: Before we quote, an engineer measures your forklift battery bay, inspects electrical connectors (Anderson / REMA), and calculates the exact laser-cut steel ballast plate needed to keep the truck safe and stable under maximum lift.
- Bench-Tested Discharge Metrics: We measure and verify every cell and pack in our test lab. If our test disagrees with the factory datasheet, we publish our measured numbers.
- 5-Year Dubai Direct Warranty: Replacement cells, BMS controllers, chargers, and technicians are stationed in Dubai for rapid response across all seven Emirates.
The Datil Honesty Pledge
We publish the numbers we measure, including the ones the manufacturer datasheet disagrees with. If a spec on this site is wrong or fails to meet performance in your facility, tell us — we retest it and correct it in public.
contact datil energy systems
Direct Engineering Support
Speak directly with our battery systems engineers for fleet conversions, custom tray sizing, or licensed energy auditing.
| Office & Workshop | Dubai & Ras Al Khaimah, United Arab Emirates |
| Sales Inquiries | sales@datil.ae |
| Engineering Desk | engineering@datil.ae |
| Phone / WhatsApp | +971 58 58-DATIL (32845) · +971 58 583 2845 |
| Operating Hours | Monday – Saturday, 8:00 AM – 6:00 PM GST |
| On-Site Territory | Dubai, Abu Dhabi, Sharjah, Ajman, RAK, Fujairah, UAQ |
Fast Machine Fitment & RFQ
Tell us your machine model, existing battery voltage, and operating shift pattern. We respond with technical fitment and pricing within 24 hours.
Message on WhatsApp (+971 58 58-DATIL)